Description
WOODEN POSTER HANGERS
Display prints with a clean, minimal alternative to traditional framing.
Made from solid wood, each hanger uses discreet magnetic strips at the top and bottom to hold artwork securely in place without adhesives or permanent fixing. A coordinated hanging cord makes it easy to display on the wall, while the lower bar adds weight and helps the print hang naturally.
The magnetic design makes it easy to change the artwork whenever you want, allowing the same hanger to be reused with different compatible prints.
Available in Natural Oak, Black, and White.
SIZES & COMPATIBILITY
Each hanger size is the length of its wooden bars. For DORVUREL posters hung in portrait orientation, use these recommended pairings:
- 8 × 12″ / 20 × 30 cm poster → 8.9″ / 22.5 cm hanger
- 12 × 18″ / 30 × 45 cm poster → 12.6″ / 32 cm hanger
- 16 × 24″ / 40 × 60 cm poster → 16.5″ / 42 cm hanger
- 20 × 30″ / 50 × 75 cm poster → 20.5″ / 52 cm hanger
- 24 × 36″ / 60 × 90 cm poster → 24.4″ / 62 cm hanger
- 32 × 48″ / 80 × 120 cm poster → 33.9″ / 86 cm hanger
These recommendations match the width of the poster when hung vertically. The other five DORVUREL poster sizes — 27 × 41″, 35 × 53″, 40 × 60″, 44 × 67″, and 47 × 70″ — do not have a recommended hanger in this range. If you plan to hang a print horizontally, check the width of the edge that will sit between the bars; the pairings above do not apply.
The wooden strips may cover up to approximately 0.6″ / 1.5 cm of the print at the top and bottom, depending on placement.
HOW IT WORKS
The hanger consists of four wooden strips — two for the top and two for the bottom. The magnetic fastening holds the print securely without glue, tape, clips, or permanent fixing.
- Separate the two magnetic strips at the top.
- Position the upper edge of the print between them.
- Let the magnets close and hold the print in place.
- Repeat the same process at the bottom.
- Hang the set on the wall using the attached cord.
The hanger can be kept and reused with different compatible prints. Simply open the magnetic strips, remove the current artwork, position another print, and hang it again.
TECHNICAL DETAILS
- Solid wood construction
- Discreet magnetic fastening
- Color-coordinated hanging cord
- Available in Natural Oak, Black, and White
- Six available widths
- Easy to open and reuse with different compatible prints
- Wooden strips may cover up to approximately 0.6″ / 1.5 cm of the print at the top and bottom
PRODUCTION & SHIPPING
Each poster hanger is produced to order.
This product is produced, packaged, and shipped within the US.
Production typically takes approximately 48 hours.
Available shipping methods and estimated delivery times are shown at checkout.
Shipping costs are calculated separately and displayed at checkout.